Bathroom · Home repair guide

Bathroom Floor Tile & Vinyl Installation in Coquitlam & the Tri-Cities

A bathroom floor takes standing water, steam, daily cleaning and the weight of a toilet and vanity. When tiles crack or vinyl lifts, water gets under the floor and into the subfloor, often around the toilet where you cannot see it. We fix the subfloor first, then install a floor that is built to handle the water.

Bathroom Floor Tile & Vinyl Installation by G2 Home Services in Coquitlam & the Tri-Cities

What goes wrong with bathroom floors if you wait

Soft subfloor by the toilet or tub

Slow leaks from a failed wax ring or tub edge rot the subfloor. The floor feels soft and the toilet may rock.

Cracked tiles

Tiles crack when the floor underneath flexes or was not prepared properly, and cracks let water through.

Lifting or curling vinyl

Older sheet vinyl lifts at seams and edges, letting water get underneath and grow mould.

Slippery surfaces

Glossy tiles become slick when wet, which is a real fall risk in bathrooms.

Common jobs we take on

  • Cracked floor tile replacement
  • Soft subfloor repair around the toilet
  • Bathroom vinyl plank installation
  • New bathroom floor tile

How Lower Mainland weather affects bathroom floors

In the damp Lower Mainland climate, bathroom floors may not fully dry between showers through much of the year. Any gap or crack becomes an entry point for water that stays trapped under the flooring.

Ground floor and basement bathrooms, common in Tri-Cities homes with suites, also sit on cooler, damp slabs that need the right underlayment or membrane to keep floors warm and dry.

Warning signs to watch for

  • Cracked, loose or hollow sounding tiles
  • Soft or bouncy areas, especially near the toilet
  • Vinyl that is lifting, bubbling or stained at seams
  • A toilet that rocks
  • Musty smell from the floor

Maintenance tips

  1. Wipe up standing water after baths and showers
  2. Seal tile grout regularly
  3. Fix running or leaking toilets right away
  4. Use a bath mat to protect the floor
  5. Check caulking where the floor meets the tub

How G2 Home Services handles bathroom floors

We remove the old flooring, check and replace any damaged subfloor, add the right underlayment or waterproof membrane, and install new tile or waterproof vinyl plank. The toilet is reset with a new seal, and the edges are caulked against the tub and walls so water cannot get underneath.

Every job is backed by our written promise: a locked-in price before we start, we redo anything you are not happy with, and a one-year workmanship guarantee.

Bathroom Floor Tile & Vinyl Installation near you

We are based in Coquitlam and take on these jobs across the Tri-Cities, Burnaby, New Westminster, Vancouver, Richmond and the North Shore. Got other small jobs too? Add them to the list and we will do them in the same visit. See small jobs & odd jobs.

Bathroom Floor Tile & Vinyl Installation: frequently asked questions

Tile or vinyl plank for a bathroom floor?

Both work well when installed correctly. Tile is very durable and classic, while waterproof vinyl plank is warmer, quieter and usually faster to install.

Can you install heated floors?

Yes, we can install electric in-floor heating under tile, with the electrical connection done by a licensed electrician.

Do you need to remove the toilet?

Yes. We remove and reset the toilet with a new wax seal so the new floor runs underneath properly.